RM820.00
Radial Engineering StageBug SB-5 Compact Stereo Laptop DI
Price RM820.00
Brand Radial Engineering
Size (L x W x H) 18.7 cm x 12.2 cm x 8 cm
Availability In Stock
Quantity
Description
Highlight
  • Stereo direct box for laptops, smartphones, and tablets
  • Built-in 5 feet cable with 3.5mm stereo plug to connect to mobile devices
  • Output 1/4" TRS jacks for full stereo operation or an XLR (sum-to- mono)
  • Transformer isolation eliminates hum and buzz
  • Plug & play easy to use, no power required
  • Compact design fits in your laptop bag

Passive Stereo Direct Box For Laptops & Mobile Devices

The Radial StageBug SB-5 is a compact & portable stereo direct box designed to accommodate laptop computers, tablets, and other consumer audio products when amplifying the signal through a PA system.

The easy way to connect to the PA

The StageBug SB-5 provides an easy to use professional interface for connecting any mobile playback device to a mixer or PA system, with a built-in cable and 3.5mm stereo plug to connect directly to your laptop, smartphone, or tablet. Inside, a pair of custom wound transformers isolate the signals to prevent hum and buzz, and balance the audio to feed long cable runs without noise. Left and right 1/4" TRS outputs are provided for stereo operation, or a mono XLR output can be used to save channels on the PA system. The SB-5 works without any power required, and features additional ground lift and pad switches to eliminate ground loop noise and prevent distortion from high output audio sources.

USE CODE SB510 FOR EXTRA 10% OFF! PASTE THE CODE AT CHECKOUT.  

Specifications  
Audio circuit type: Passive, transformer based
Number of channels: Two channels
Frequency response: 20Hz ~ 20KHz (± 1dB)
Dynamic range: 100dB
Total harmonic distortion: 0.01% @ 1kHz
Phase Deviation: 2° @ 100Hz; 5° @ 50Hz
Input Impedance: 40k Ohms, unbalanced
Output Impedance: 2.8k Ohms, balanced
Maximum Input: +20dB
Features
Input pad, Mono Sum, Ground lift
Input Connectors: 3.5mm
Output Connectors: 1/4" TRS, XLR
General
Construction: 14 gauge steel chassis & outer shell
Size (L x W x D): 4.5" x 1,85" x 1.35" (114mm x 47mm x 34mm)
Weight: 0.55 lbs (250 grams)
Shipping size (L x W x D): 8" x 5" x 3" (203mm x 127mm x 76mm)
Shipping weight: 0.8 lbs (365 grams)
Power: Passive, no power required
Conditions: For use in dry locations only between 5°C and 40°C