RM5,100.00
DPA 2011C Compact Twin Diaphragm Cardioid Microphone
Price RM5,100.00
Brand DPA Microphones
Size (L x W x H) 10.7 in x 6.2 in x 2.7 in
Availability In Stock
Quantity
Description
Highlight
  • All-round workhorse – blends clarity, richness and dynamics
  • Twin-Diaphragm-Capsule and interference tube technologies
  • Superb stage separation and level control
  • Modular flexibility

Slender, Versatile Performer for Stage and Studio

The DPA d:dicate 2011c is a twin diaphragm, compact, cardioid condenser microphone. Sharing much of the same technology and design ethos from the 4000 series, DPA’s flagship condenser mic line, the 2011c offers similar performance at an affordable price.  

The capsule design contains two, opposite facing diaphragms, which are rebuilt into a single capsule. This means the mic has the advantages of a small capsule, with a fast impulse response and a large frequency bandwidth, but has lower inherent noise thanks to its larger overall diaphragm surface area. The 2011C contains an MMP-C pre-amplifier that subtly adds a little more “body” to the low end, and its compact size makes the mic much easier to position.

 The 2011 offers linear response at off axis positions, meaning a better gain to feedback ratio and making stage separation and mic level easier to control. The mic is also of a modular design, meaning it’s easy to swap out the capsule to change the pick-up pattern.

 

DPA 2011C Specifications

Directional pattern: Cardioid

Principle of operation: Pressure gradient, with interference tube

Cartridge type: Pre-polarized condenser, Twin Diaphragm Capsule

Frequency range: 20 Hz to 20 kHz

Frequency range, ± 2 dB, at 30 cm: 50 Hz to 17 kHz with 3 dB soft boost at 12 kHz

Sensitivity, nominal, ± 2 dB at 1 kHz: 10 mV/Pa; -40 dB re. 1 V/Pa

Equivalent noise level, A-weighted: Typ. 20 dB(A) re. 20 µPa (max. 23 dB(A))

Equivalent noise level, ITU-R BS.468-4: Typ. 33 dB (max. 36 dB)

S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 74 dB(A)

Total Harmonic Distortion (THD) at 1 kHz: < 1 % up to 137 dB SPL peak

Dynamic range: Typ. 117 dB

Max. SPL, peak before clipping: 146 dB

Minimum load impedance: 2 kohm

Output impedance: < 200 ohm

Cable drive capability: 100 m (328 ft)

Output balance principle: Impedance balancing with Active Drive

Common Mode Rejection Ratio (CMRR): > 50 dB

Power supply (for full specifications): 48 V Phantom power (± 4 V)

Current consumption: 2.8 mA

Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase

Color: Matte black

Microphone weight: 64 g (2.3 oz)

Microphone diameter: 19 mm (0.75 in)

Microphone length: 92 mm (3.6 in)

Output voltage, RMS: > 4 V

Polarity: +V at Pin 2 for positive sound pressure

Temperature range: -40 °C to 45 °C (-40 °F to 113 °F)

Relative Humidity (RH): Up to 90%

Tags: mic